A Product by GO Systemelektronik
OverviewSpecificationsSensor SpecificationsResources

Features of Online Conductivity/TDS Analyzer with Universal Controller

Display
  • Graphic touch display [multilanguage] 240 x 128 Pixel
  • Display of measured values
  • Bargraphs
  • Function keys
  • Setting up of limit and alarm values
Memory
  • SD card slot for data storage and software update
Housing
  • Polycarbonate, 235 x 185 x 119 mm, IP65
  • Environmental conditions: -10 to +45 °C
Features
  • PID controller
  • Signal compensation
  • Data storage on SD card
Outputs
  • 2x current outputs (4 to 20 mA)
  • 2x relay with a switching capactity of 230 VAC; 2 A
  • 2x relay with a switching capacity of 24 V; 0.5 A
Measurement channel 1 and 2Measurement range
Conductivity: measuring principle: inductive0 - 120 mS
Conductivity: measuring principle: conductive0 - 120 mS
Temperature: measuring principle: NTC-10 to +80 °C
Calculated Sensors:
Salinity: calculated from conductivity, temperature and pressure2-42
Interfaces:
RS-232, RS-485, 9600 Baud, various protocols e.g. Modbus
CAN-bus access for connection to the BlueBox System
Power supply:
12 VDC (9 - 18 V); approx. 8 W
24 VDC (18 - 36 V); approx. 8 W
230 VAC (90 - 260 V); approx. 8 W
Characteristics
  • 2-electrode ultra-pure water cell with pipe thread acc. to DIN ISO228
  • Measuring range from 0..0.5 μS/cm up to0..50 μS/cm

Cell constantC = 0.1 exact cell constant labeled on the type plate
Process temperature-10..+120 °C
CIP-/SIP-capable 140 °C < 1 h
Process pressuremax. 16 bar
Process materialstainless steel 1.4404
electropolished; PVDF; seal EPDM
LF1653flat cable connector, only head mounting UNICON-LF
LF26538 pole round connector plug M12x1, IP67
Materialbrass nickel plated
Temperature measurementintegrated Pt1000 sensor DIN IEC751, class A
Resources