Pro-Lab control system bioreactors
A Product by SYSBIOTECH SARL Company
OverviewSpecificationsResources

Pro-Lab control system bioreactors

Basic PRO-LABTM system consists of a PC/HMI with C-BIO2™ operator and control software, a fermenter vessel and a PRO-LAB™ controller unit, which can control up to two (2) vessels. The PRO-LAB™ controller is a fully functional controller designed for fermentation and cell culture applications for process research and development work. The PRO-LAB™ design and configuration is flexible and can be configured to meet your specifications.

A PLC, incorporated in the PRO-LABTM controller, collects the measured quantities and ensures the correct operation and precision of the control loops.

The human/machine interface is installed on a separate device and communicates via Ethernet with the controller’s PLC to exchange the main data.

The following vessels can be used with PRO-LAB TM control system:
  • single jacketed with a working volume ranging from 200 ml to 8 l
  • double jacketed with a working volume ranging from 1 l to 10 l

Sysbiotech offers the following range of vessels for your cultures:
Autoclavable, double jacketed glass vessels
MaterialsBorosilicate glass, stainless steel, AISI316L, EPDM
Vessel typeHemispherical bottom
Working volume (L)1 1.5 2 5 8 10
Total volume 1.3 2 3 7.5 11 13.5
Head plate ports 9 9 11 13 16 16
Height*/Diameter (mm) 425/268 520/268 520/274 614/337 664/382 730/382

*To the top of the condenser


Autoclavable, single jacketed glass vessels
MaterialsBorosilicate glass, stainless steel, AISI316L, EPDM
Vessel typeFlat bottom
Working volume (L) 0.2 0.5 1 1.5 2 5 8
Total volume (L) 0.25 0.6 1.3 2 3 7.5 11
Head plate ports 9 99 9 11 13 16
Vessel side ports 3 3 3 3 x x x
Height*/Diameter*(mm) 360/268 370/288 435/288 530/340 562/390

Up to 8 parameters can be controlled per vessel: Agitation, Temperature, pH, pO2, Antifoam, level, Redox, Optical Density, etc., so you can choose the parameters required for the perfect realization of your batch, fed-batch or perfusion process.

The peristaltic pumps, the rotameters and the pneumatic fittings for the vessels and instruments also located on the front of the controller.

A visual indicator (red or green light) informs you that the machine is operating correctly and warns you in real time of any malfunctions. The entire machine has been designed to be simple and intuitive to use. An emergency stop button is included, located on the front of the controller.