CSBox HFA CS Analyzer

Home > Elemental Analyzers > Carbon and Sulfur Analyzers > CSBox HFA CS Analyzer

Overview

more details

Furnace	High Frequency Induction Furnace
Heating Elements
Carbon	0.0001% to 100% based on the sample weight
Sulfur	0.0001% to 20% based on the sample weight
Detector	Non Dispersive Infrared Detection
Accuracy	± 1% Relative
Sensitivity	0.1 ppm
Analysis Time	20 to 60 Sec
Sample Weight	20 to 2000 mg Depends on the sample type
Required Chemicals/ Reagents	Magnesium perchlorate (Anhydrone) Glass Wool
General Requirements
Ambient Conditions	15 to 35°C
Relative Humidity	20 – 80% (not condensing)
Power Supply	230V AC ± 10%; 50/60Hz
Gases	Oxygen 99.95% purity

Description

CSBox HFA CS Analyzer

CSBox HF Analyzer is used to determine Carbon and Sulfur in Inorganic samples like steel, Iron, ores, finished metals and other inorganic samples. Simultaneously it does Carbon and Sulfur determination with minimal sample preparation. It consists of two independent infrared cells with wide measuring range of Carbon and Sulfur. The measuring range of each infrared cell is modified to the user’s specific requirement to ensure optimum measurement conditions for each application. CSBox HF is supplied with a comprehensive user friendly software which features statistic reports, diagnostics and other functions. High frequency induction furnace ensures complete decomposition of samples like Steel, Ores, Cast iron, Refractory samples. Unique user friendly design of Orbit, where Furnace is Isolated from the infrared analyzer to improve the life of the NDIR analyzer. Automatic crucible loading with tool free auto cleaning of the combustion tube

Models

CSBox HFA CS, Carbon and Sulfur Analyzer with Auto Crucible lift

Cat. No: 21-20000

CSBox HFA C, Carbon Analyzer with Auto Crucible lift

Cat. No: 21-10000

CSBox HFA S, Sulfur Analyzer with Auto Crucible lift

Cat. No: 21-30000

CSBox DCS, Carbon and Sulfur Analyzer w/HFA and Tube Furnace for organic and inorganic samples