Home > Milling & Pulverising > Hammer Mill
Hammer- and hammer impact mills are suitable for crushing soft to medium hard materials (degrees of hardness according to F. Mohs 2 – 5). For example: agglomerates, coal, limestone, gypsum and slag.
They are designed for large through-put volumes and trouble-free operation.
Hammer impact mills are particularly suited very coarse material for whilst attaining a high degree of comminution with large through-puts.
The HM 1-L hammer mill was specially designed for use in and the requirements of the laboratory.
In a special execution that mill can also be used for the grinding of laboratory samples of metal filings.
Hammer mill
|
HM 1
|
|
Dimensions (W × H× D)
|
mm
|
460 × 1222 × 991
|
Weight
|
kg
|
290
|
Motor
|
kw
|
5,5
|
Feed size (max.)
|
mm
|
50
|
Discharge grain size
|
mm
|
02 - 30
|
Throughput (with 10 mm slot)
|
kg/h
|
1000
|
Container volume
|
dm³
|
approx. 10
|
Operating voltage
|
|
400 V, 3/N/PE, 50 Hz
|
The throughput rate depends on the gap width of the grating basket, the bulk density and the comminution behavior of the crushed material.
|
||
Subject to technical changes.
|
Copyright © 2022 Orbit Technologies, All Rights Reserved & Powered By GoogleRank.