Jaw Crusher

Home > Milling & Pulverising > Jaw Crusher

Overview

Jaw crushers are used for coarse grinding brittle, medium-hard to hard materials up to a Mohs’ hardness of approx. 8.5. Here reduction ratios of up to 1:100 are possible depending on the actual model concerned.

The crushing jaws are executed by us in two versions: In a laboratory model with integrated control system, feeding funnel and collecting tank, and a version for installation in plants. Omitted from this latter version are the feeding funnel, collecting tank and the control system.

Specifications

Downloads

Jaw crusher		EB 50x40-L	EB 100x80-L	EB 150x100-L	EB 200x125-L	EB 300x250-L
Dimensions (W × H× D)	mm	325 x 630 x 620	470 x 951 x 773	615 x 1150 x 938	663 x 1340 x 1192	972 x 1874 x 1716
Weight	kg	95	250	380	795	2255
Motor	kW	1.1	2.2	4	7.5	18.5
Feed opening width (W x D)	mm	50 x 40	100 x 80	150 x 100	200 x 125	300 x 250
Discharge opening	mm	0 – 10	0 - 12	0 - 15	0 - 28	0 - 30
Min. lift in the discharge opening	mm	0.5	1.2	1.4	1.4	2.0
Max. feed size with manual feed	mm	30	70	90	110	240
Drive type	kg/h	10-50	50 - 350	75 – 500	250 – 2000	400 - 3500
The throughput is dependent on the size of the discharge opening and the size reduction behaviour of the crushed material. Fineness is decisively determined by the discharge opening set. Subject to technical changes.

Jaw crusher		EB 100x80	EB 150x100	EB 200x125	EB 300x250
Dimensions (W × H× D)	mm	470 x 578 x 773	615 x 701 x 938	663 x 874 x 1192	973 x 1610 x 1639
Weight	kg	215	335	735	2160
Motor	kW	2.2	4	7.5	18.5
Feed opening width (W x D)	mm	100 x 80	150 x 100	200 x 125	300 x 250
Discharge opening	mm	0 – 12	0 – 15	0 - 28	0 - 30
Min. lift in the discharge opening	mm	1.2	1.4	1.4	2.0
Max. feed size with continues feed	mm	35	50	65	100
Throughput	kg/h	50 – 300	75 – 400	250 – 2000	400 - 3500