Disc Mill

Overview

The disc mill can be used to finely grinding soft to hard materials with a Mohs hardness of up to 8.

Operating Behavior & Mechanical Characteristics

Grinding in the disc mill is done between two roughly toothed grinding discs. One grinding disc is stationary, the other is rotated by a geared motor, thus exerting a shearing action on the material to be broken up. The gap between the two grinding discs determines the fineness of the material ground up. By means of an adjuster wheel with an integrated scale to alter the position of the stationary grinding disc the gap width between the two grinding discs can be repeatably set. The ground-up material falls into a glass bottle placed underneath the grinding discs.

The SBM’s sound-insulating housing is designed to swing open to enable the grinding chamber to be opened for inspection/cleaning without having to use tools. The door is monitored by a safety sensor and blocks access to the grinding disc while it is rotating.

Disc mill
SBM 200
Dimensions (W × H× D)
mm
400 x 825 x 600
Weight
kg
135
Drive power
kW
1,5
Grinding disc diameter
mm
200
Granular feed size (max.)
mm
20
Discharge slot
mm
0,1 - 5,5
Throughput
kg/h
5 - 150
Operating voltage
400 V, 3/N/PE, 50 Hz
The throughput depends on the size of the discharge slot, the bulk density and the characteristics of the material to be crushed. The degree of fineness is primarily determined by the setting of the discharge slot. We reserve the right for technical changes.
Description

Request a Quote

Leave us your details and we will contact you soon.